Carl's spider still for sale at reduced price $3,500

FIAT cars and parts for sale (or trade)
User avatar
SimcaBertone66
Posts: 430
Joined: Fri Oct 07, 2016 3:28 pm
Last Name: DeGasperis
First Name: Joseph

Re: Carl's spider still for sale at reduced price $3,500

Post by SimcaBertone66 » Sun May 20, 2018 2:12 pm

Carl, just for clarity's sake... what happened to the IDF's, with 28 mm choke tubes and standard 32 mm tubes , port matched manifold and "balls" you bought from me a few years back ?
Joe DeGasperis
User avatar
friedman
mille club
Posts: 1182
Joined: Wed Aug 24, 2016 8:13 am
Last Name:

Re: Carl's spider still for sale at reduced price $3,500

Post by friedman » Sun May 20, 2018 4:51 pm

Probably the set I have sitting on my storage shelf. How do I id them as the ones I got from you?
The balls I still have.....the ones for the carb intakes, not mine.
Carl in Virginia
80 spider
86 Bertone
77 X1/9
User avatar
SimcaBertone66
Posts: 430
Joined: Fri Oct 07, 2016 3:28 pm
Last Name: DeGasperis
First Name: Joseph

Re: Carl's spider still for sale at reduced price $3,500

Post by SimcaBertone66 » Sun May 20, 2018 6:00 pm

552173_424173567642072_1822656646_n.jpg
552173_424173567642072_1822656646_n.jpg (90.55 KiB) Viewed 152 times
They should look like this "balls" and all...... no seriously they came to you with 28mm choke tubes, which is contrary to all of the "experts" that tout using 34mm, up fro the standard IDF 40's 32 mm chokes. The 28mm chokes were for quicker throttle response combined with radical cams and 13.5 to 1 CR. They also have shiny blank off plates, made for me by Pete Angel many moons ago, for the cold start device, the tall ram tubes and the fuel pressure thingy You should also have a set of 4, 32 mm chokes that were sent with the carbs.
Attachments
73277_119634278096004_7306554_n.jpg
73277_119634278096004_7306554_n.jpg (83.72 KiB) Viewed 152 times
Joe DeGasperis
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests