124 1800 Single-Plane Intake Manifold

FIAT cars and parts for sale (or trade)
Post Reply
User avatar
fiat850
quattromila club
Posts: 4100
Joined: Sun Jan 24, 2016 11:30 am
Last Name:

124 1800 Single-Plane Intake Manifold

Post by fiat850 » Wed May 23, 2018 5:04 am

Used original alloy intake manifold for 1.8L Fiat 124 Spider engines, can also be fitted to the later 2.0L engine (with better carb) for increased performance. Good condition overall, this manifold has been media-blasted clean of all grease/paint/etc.. The large emissions pipe/banjo fitting has been removed & the original (hollow-center) hex plug has been refitted. The 2 hose port T-fittings, 2 lower electrical sensors & the upper reed valve fitting have been removed but are included, as shown.

$90 + USPS shipping from 92860, payment via Paypal preferred, thanks. ;)

124manifold2a.jpg
124manifold2a.jpg (293.62 KiB) Viewed 177 times
124manifold2b.jpg
124manifold2b.jpg (281.18 KiB) Viewed 177 times
124manifold2c.jpg
124manifold2c.jpg (305.21 KiB) Viewed 177 times
124manifold2d.jpg
124manifold2d.jpg (263.48 KiB) Viewed 177 times
---------------------------------------------------
Jeff Stich
RicardoIII
Posts: 29
Joined: Thu Oct 12, 2017 6:37 pm
Last Name: Landeira
First Name: Ricardo

Re: 124 1800 Single-Plane Intake Manifold

Post by RicardoIII » Wed May 23, 2018 9:06 am

Will it work on a 1600 engine as well?
User avatar
fiat850
quattromila club
Posts: 4100
Joined: Sun Jan 24, 2016 11:30 am
Last Name:

Re: 124 1800 Single-Plane Intake Manifold

Post by fiat850 » Sat May 26, 2018 2:56 pm

RicardoIII wrote:
Wed May 23, 2018 9:06 am
Will it work on a 1600 engine as well?
According to vendor listings I've seen for a similar manifold, it should work on the 1600, 1800 & 2000 engines. YMMV ;)
---------------------------------------------------
Jeff Stich
fp55scca
duemila club
Posts: 2136
Joined: Sun Jan 24, 2016 11:34 am
Last Name:

Re: 124 1800 Single-Plane Intake Manifold

Post by fp55scca » Sun May 27, 2018 8:41 pm

fiat850 wrote:
Sat May 26, 2018 2:56 pm
According to vendor listings I've seen for a similar manifold, it should work on the 1600, 1800 & 2000 engines. YMMV ;)
-------------------------------------------------------------------
That's correct Jeff. It will work on all of the 124 Spider TC motors...1438, 1608, 1756 and 2L. Depending on the particular application, some of the heads varied in port size. So for optimum performance, some port matching may be beneficial.
Jim Scurria
Norfolk, VA

1972 Fiat 124 Spider
1971 Spider - SCCA FP-24
1974 Fiat 124 Spider
User avatar
fiat850
quattromila club
Posts: 4100
Joined: Sun Jan 24, 2016 11:30 am
Last Name:

Re: 124 1800 Single-Plane Intake Manifold

Post by fiat850 » Mon Jun 11, 2018 4:08 pm

<<BUMP>> Still available!
---------------------------------------------------
Jeff Stich
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests