Page 1 of 2

Washer hoses and T

Posted: Sat Jan 13, 2018 3:23 pm
by friedman
For my spider windshield washer, I need the small hoses that go to the washer nozzles and the T connector that connects the two nozzle hoses to the larger pump hose.

Re: Washer hoses and T

Posted: Sat Jan 13, 2018 8:47 pm
by SimcaBertone66
McMaster-Carr for all thing .... big and small... want me to look for Carl? .... singing .."That's what friends are for" ..

Re: Washer hoses and T

Posted: Sat Jan 13, 2018 8:50 pm
by SimcaBertone66
Dude...... I looked , they have what you need

Re: Washer hoses and T

Posted: Sat Jan 13, 2018 8:51 pm
by SimcaBertone66
Home depot ... for instant gratification ?

Re: Washer hoses and T

Posted: Sun Jan 14, 2018 12:23 pm
by friedman
While Home Despot should probably be a proud sponsor of my street X the truth is they don't sell hoses and Ts that tiny. The T is funky because the supply hose from the pump is a larger diameter than the hoses to the nozzles. I thought one of you clowns would have an old cowl with this stuff still attached...I was shocked to find out I didn't have it.

Re: Washer hoses and T

Posted: Sun Jan 14, 2018 1:39 pm
by SimcaBertone66
Man the tubing for the washer was brittle as hell 20 years ago ... but good luck

Re: Washer hoses and T

Posted: Sun Jan 14, 2018 2:47 pm
by cjwaters
Fiat Plus has them. I plumbed my 128 Rally with their hose - worked great.

http://www.fiatplus.com/WINDSHIELD-WASHER-FLUID-T.html

http://www.fiatplus.com/WINDSHIELD-WASHER-JET-HOSE.html

http://www.fiatplus.com/W-SHIELD-WASHER ... -HOSE.html

I do have a number of T's from 128s, maybe 124s. Next time I'm over at the big top tent I'll look and see if there's one with a bit inlet and small outlets. :lol:

Re: Washer hoses and T

Posted: Sun Jan 14, 2018 4:27 pm
by friedman
Apparently there were different sized nozzles in regard to the hose spigots but the spigots I have use the really small hoses, hence the need for a dual sized T. I'm sick when I think of all this stuff I have apparently tossed in the past.

Re: Washer hoses and T

Posted: Mon Jan 15, 2018 11:32 pm
by cjwaters
I found a T that's about 5.1 mm OD on the inlet and 3.4 mm OD on the outlets. Should be right for the hose I linked to earlier. I've got plenty of old hose if you want it. But I think you should live a little and treat yourself to some new stuff ;)

Re: Washer hoses and T

Posted: Tue Jan 16, 2018 12:31 am
by atruscott
ACE hardware, or an aquatics supplier - fish tank piping and fitments work just fine!