Stock non alloy wheel Fiat lug bolts

FIAT cars and parts wanted
Post Reply
User avatar
SimcaBertone66
Posts: 494
Joined: Fri Oct 07, 2016 3:28 pm
Last Name: DeGasperis
First Name: Joseph

Stock non alloy wheel Fiat lug bolts

Post by SimcaBertone66 » Sun Jan 28, 2018 11:42 am

Looking to mount the steel 124 wheels on the Simca. The PO of the car converted to studs but not the best choice or execution
Looking for a full set and maybe a spare or two... stock non alloy wheel Fiat wheel bolts.
Thanks in advance
JD
Last edited by SimcaBertone66 on Wed Jan 31, 2018 2:41 pm, edited 1 time in total.
Joe DeGasperis
User avatar
friedman
mille club
Posts: 1359
Joined: Wed Aug 24, 2016 8:13 am
Last Name:

Re: Stock non allow wheel Fiat lug bolts

Post by friedman » Sun Jan 28, 2018 1:20 pm

You must be the only guy in Fiat land who doesn't have about 150 Fiat wheel bolts laying around. What length do you need?
Carl in Virginia
75 spider
86 Bertone
77 X1/9
User avatar
SimcaBertone66
Posts: 494
Joined: Fri Oct 07, 2016 3:28 pm
Last Name: DeGasperis
First Name: Joseph

Re: Stock non allow wheel Fiat lug bolts

Post by SimcaBertone66 » Sun Jan 28, 2018 2:08 pm

I do .... were is the question . I see a rusty coffee can somewhere ... Are there after marked metric wheel bolts out there .. ? I know there are metric stud kits ...
Joe DeGasperis
User avatar
SimcaBertone66
Posts: 494
Joined: Fri Oct 07, 2016 3:28 pm
Last Name: DeGasperis
First Name: Joseph

Re: Stock non allow wheel Fiat lug bolts

Post by SimcaBertone66 » Sun Jan 28, 2018 2:10 pm

friedman wrote:
Sun Jan 28, 2018 1:20 pm
You must be the only guy in Fiat land who doesn't have about 150 Fiat wheel bolts laying around. What length do you need?
i DONT KNOW ..... DOH
Joe DeGasperis
User avatar
fumi
Posts: 311
Joined: Sun Jan 24, 2016 11:37 am
Last Name:

Re: Stock non allow wheel Fiat lug bolts

Post by fumi » Sun Jan 28, 2018 5:47 pm

Some digging in the shed found these:

15 bolts are the same and 1 is a bit different (bottom left one). I believe these came from the Sedan.

You want 'em?
Attachments
Lug nuts.JPG
Lug nuts.JPG (2.23 MiB) Viewed 851 times
Chris F
'69 124 AC Coupe
'73 124 Special TC
User avatar
fiat850
quattromila club
Posts: 4145
Joined: Sun Jan 24, 2016 11:30 am
Last Name:

Re: Stock non allow wheel Fiat lug bolts

Post by fiat850 » Tue Jan 30, 2018 2:51 am

Besides lugbolt length, you'll also need to keep thread pitch in mind. Fiat 124, 128, 131, X1/9 & Strada all used 12x1.25mm. Does the Simca use this? Or does it share the 12x1.50mm thread pitch with the Fiat 850?

Not sure why I got a "deja vu" feeling typing that? :|
---------------------------------------------------
Jeff Stich
User avatar
SimcaBertone66
Posts: 494
Joined: Fri Oct 07, 2016 3:28 pm
Last Name: DeGasperis
First Name: Joseph

Re: Stock non allow wheel Fiat lug bolts

Post by SimcaBertone66 » Tue Jan 30, 2018 7:34 am

Ha, I will find out , besides we will be replacing studs installed by the PO and will probable have to retap /repair the threads
Joe DeGasperis
User avatar
SimcaBertone66
Posts: 494
Joined: Fri Oct 07, 2016 3:28 pm
Last Name: DeGasperis
First Name: Joseph

Re: Stock non allow wheel Fiat lug bolts

Post by SimcaBertone66 » Tue Jan 30, 2018 7:36 am

At least they are all 4x98 ...
Joe DeGasperis
User avatar
fumi
Posts: 311
Joined: Sun Jan 24, 2016 11:37 am
Last Name:

Re: Stock non allow wheel Fiat lug bolts

Post by fumi » Tue Jan 30, 2018 10:18 pm

Should be there Thursday according to USPS.
Chris F
'69 124 AC Coupe
'73 124 Special TC
Post Reply

Who is online

Users browsing this forum: cgranju and 2 guests