Let's go quad racing

Pictures of your baby.
Post Reply
User avatar
friedman
mille club
Posts: 1373
Joined: Wed Aug 24, 2016 8:13 am
Last Name:

Let's go quad racing

Post by friedman » Fri Dec 07, 2018 11:55 am

IMG_0595[1].JPG
IMG_0595[1].JPG (106.6 KiB) Viewed 169 times
I'm ready, bring on the mud, all my old motocross racing skills are coming back to me. Actually just helping my daughter assemble them for my grandsons
Carl in Virginia
75 spider
86 Bertone
77 X1/9
fp55scca
duemila club
Posts: 2281
Joined: Sun Jan 24, 2016 11:34 am
Last Name:

Re: Let's go quad racing

Post by fp55scca » Sat Dec 08, 2018 8:09 pm

--Hey Carl, if you hear your family discussing an "intervention", maybe you better run for it? :)
Jim Scurria
Norfolk, VA

1972 Fiat 124 Spider
1971 Spider - SCCA FP-24
1974 Fiat 124 Spider
User avatar
friedman
mille club
Posts: 1373
Joined: Wed Aug 24, 2016 8:13 am
Last Name:

Re: Let's go quad racing

Post by friedman » Sun Dec 09, 2018 9:06 am

My family goes out of it's way to pretend I don't exist, heavy into denial.
Carl in Virginia
75 spider
86 Bertone
77 X1/9
User avatar
jseabolt
seimila club
Posts: 6107
Joined: Sun Jan 24, 2016 7:27 pm
Last Name:

Re: Let's go quad racing

Post by jseabolt » Sat Dec 15, 2018 4:57 pm

friedman wrote:
Fri Dec 07, 2018 11:55 am
IMG_0595[1].JPG

I'm ready, bring on the mud, all my old motocross racing skills are coming back to me. Actually just helping my daughter assemble them for my grandsons
A co-worker gave me this one for fixing his big Yamaha ATV that rolled down a cliff.

http://s222.photobucket.com/user/turbof ... t=2&page=1

At the time the rear shock was broken, among other things. Since then I hit an auger in the field and broke the rear axle. So now it has a narrower rear axle and rear wheels from a Snapper lawnmower because the bolt pattern was not the same and neither was the threads on the new axle so I couldn't swap the hubs.

The chain was rubbing the frame so I removed the rear shock and installed a turn buckle which creates a bumpy ride.

The day I got it running. I had a bungee cord holding it together and a piece of threaded rod.

https://www.youtube.com/watch?v=qyoHXaNn7Pk
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest