Routine brake service after 8 years service

Pictures of your baby.
Post Reply
User avatar
Posts: 589
Joined: Fri Oct 07, 2016 3:28 pm
Last Name: DeGasperis
First Name: Joseph

Routine brake service after 8 years service

Post by SimcaBertone66 » Sun Jun 18, 2017 8:07 pm

Upper control arm with made in house Delrin bushings with Oilite bushing inserts. Store bought Delrin bushings were terrible and discarded.
Hand fabricated shock tower/bump stock still looking sound after 10 years....
Millers Mule Machine hub spacers and 1/2 inch 20 studs. Stud threaded from back side of hub and TIG welded
19030291_1459205027472249_3684614053208900548_n.jpg (62.68 KiB) Viewed 631 times
19030222_1459205020805583_3254319756943984152_n.jpg (62.4 KiB) Viewed 631 times
18424136_1459204900805595_9173208636000165462_n.jpg (73.14 KiB) Viewed 631 times
Joe DeGasperis
User avatar
mille club
Posts: 1613
Joined: Wed Aug 24, 2016 8:13 am
Last Name:

Re: Routine brake service after 8 years service

Post by friedman » Mon Jun 19, 2017 8:25 am

What, no trick A-arms with heim joint adjustment on both legs of the A-arm! Your typical Honda squid can get them their cars.
Carl in Virginia
75 spider
86 Bertone
77 X1/9
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest