1981 124 Spider with Pininfarina hardtop.

FIAT cars and parts for sale (or trade)
User avatar
SimcaBertone66
Posts: 474
Joined: Fri Oct 07, 2016 3:28 pm
Last Name: DeGasperis
First Name: Joseph

Re: 1981 124 Spider with Pininfarina hardtop.

Post by SimcaBertone66 » Tue Nov 06, 2018 8:25 am

Thank you for fixing it Bradley …. again, a well turned out car ….. the Pinnin top and Recaros set the car on a different order of cool ….
Joe DeGasperis
User avatar
mikehynes
Posts: 578
Joined: Sun Jan 24, 2016 7:55 pm
Last Name:

Re: 1981 124 Spider with Pininfarina hardtop.

Post by mikehynes » Fri Nov 09, 2018 7:07 am

Is the convertible top still installed? Is it possible to install the hardtop and still have the convertible top in place beneath it?
Two '80 124 Spiders
Lots of X1/9s
Mike Hynes
Bedilion
Posts: 45
Joined: Wed Aug 31, 2016 4:05 pm
Last Name:

Re: 1981 124 Spider with Pininfarina hardtop.

Post by Bedilion » Fri Nov 09, 2018 11:07 am

Hi Mike,
I bought the car without a convertible top assembly, but with the Pini top.
I have acquired a late model convertible top assembly that goes with the car.
Yes, the convertible top when folded down will allow the Pini top to be put on.
This car had been stored in a garage for 12 years with a bad clutch before I bought it.
Any questions, just ask away. Steve B.
fp55scca
duemila club
Posts: 2238
Joined: Sun Jan 24, 2016 11:34 am
Last Name:

Re: 1981 124 Spider with Pininfarina hardtop.

Post by fp55scca » Tue Nov 13, 2018 11:06 am

Bedilion wrote:
Fri Nov 09, 2018 11:07 am
---I have acquired a late model convertible top assembly that goes with the car.
---Yes, the convertible top when folded down will allow the Pini top to be put on.
--------------------------------------------
--Hi Steve. I really like your '81 Spider....I think you've done an excellent job with it!

--Question: I've had a Pininfarina top for about 18 years now. I've had it installed on early Spiders ('71, '72 and a '74) and now it's on an '81 Spider. I've never been able to install one with the convertible top in place and still achieve a proper seal around the base of the Pininfarina top? Is this something that you have already done, or are you just speculating that it can be done? The CSA was not produced with a rag-top.
Jim Scurria
Norfolk, VA

1972 Fiat 124 Spider
1971 Spider - SCCA FP-24
1974 Fiat 124 Spider
Bedilion
Posts: 45
Joined: Wed Aug 31, 2016 4:05 pm
Last Name:

Re: 1981 124 Spider with Pininfarina hardtop.

Post by Bedilion » Tue Nov 13, 2018 8:06 pm

Hmmm. I was wondering about that.
I do not have a folding top installed on the car, but I have one that will go along with the sale.
fp55scca
duemila club
Posts: 2238
Joined: Sun Jan 24, 2016 11:34 am
Last Name:

Re: 1981 124 Spider with Pininfarina hardtop.

Post by fp55scca » Tue Nov 13, 2018 9:53 pm

--Steve, if you look at your #4 picture, (with the passenger seat folded forward), you can see a black section of the hardtop (directly under the rear window) that comes down and nearly touches the top the backrest of the rear seat. This is primarily where the Pininfarina top interferes with the folded soft top. There is also interference on the sides as well, beside the soft top quarter windows. In some instances, I have removed the chrome trim/wiper strip beside the quarter windows to get a better seal.
Jim Scurria
Norfolk, VA

1972 Fiat 124 Spider
1971 Spider - SCCA FP-24
1974 Fiat 124 Spider
User avatar
vandor
quattromila club
Posts: 4359
Joined: Sun Jan 24, 2016 10:03 pm
Last Name:

Re: 1981 124 Spider with Pininfarina hardtop.

Post by vandor » Tue Nov 13, 2018 11:47 pm

The factory manual says to undo the rear of the convertible top from the body before installing the hard top. The rest of the top frame, etc. can stay in place.
Csaba
Parts: http://www.autoricambi.us
Cars: http://italiancarclub.com/csaba/Fiat.html
'71 124 Spider, much modified
'72 124 Coupe, new project, ex-Pete, ex-Eli, ex-Jack car (all Mira members)
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests